Mitsubishi Electric MELSEC iQ-R Series User Manual page 516

[Cd.42] Stop command processing for deceleration stop selection
Sets the stop command processing for deceleration stop function (deceleration curve re-processing/deceleration curve
continuation).
Fetch cycle: At deceleration stop causes occurrence
■Setting value
• Set with a decimal.
Setting value
0
1
■Buffer memory address
Refer to the following for the buffer memory address in this area.
Page 402 System control data
■Default value
Set to "0".
12 DATA USED FOR POSITIONING CONTROL
514
12.8 Control Data
Downloaded from ManualsNet.com search engine
Details
Deceleration curve re-processing
Deceleration curve continuation