File Configuration Of The Motion System Software - Mitsubishi Electric MELSEC iQ-R Series User Manual

File configuration of the motion system software

This section describes the configuration of the motion system software downloaded from the Mitsubishi Electric FA Global
Website. The motion system software (sw12dnn-rmtufw_xx.zip) includes the following files.
File
Motion system software for RD78G (sw12dnn-rmtufw_xx.zip)
Motion software package (RD78GSW.smpk)
instnew
Basic system software (baseSystem.smpk)
Each add-on library (.mpk)
instboot
Boot software (.img)
*1 "xx" indicates the version of the basic system software.
The motion software package (RD78GSW.smpk) includes the following files.
File
Motion software package for RD78G (RD78GSW.smpk)
Basic system software
Each add-on
*2 For the add-ons included in the motion software package (RD78GSW.smpk), refer to the following.
Page 667 List of Add-on Libraries
At the installation, unzip the files in the motion system as follows.
File
/sys drive
Basic system software
Each add-on
The boot software is not recognized as a drive.
Motion software
package (.smpk)
Add-on
(For control)
Basic system
software
(For control)
Boot software(.img)
Boot software
(For control/network)
9 COMMON FUNCTIONS
356
9.12 Software Installation to the Own Module
Downloaded from ManualsNet.com
*2
Boot software update
search engine
*1
Motion system
Add-on
Install
(For control)
Basic system
Install
software
(For control)
Boot software
(For control)
Network
boot software
(For network)