Mitsubishi Electric MELSEC iQ-R Series User Manual page 361

Checking the software versions
Versions of the installed software can be checked using the engineering tool (GX Works3).
■Checking using GX Works3
Software versions can be checked from the Product Information List window.
[Diagnostics]  [System Monitor]  [Product Information List]
Versions of the basic system software and boot software (for control/for network) are displayed.
For the version of each add-on compatible with the basic system software, refer to the following.
Page 669 List of Boot Software
In the case of motion system software, only the version (up to the second digit from the left) of the boot
software (for network) is displayed immediately after starting the motion unit (while loading add-ons).
Version of the boot software (for network) (2 digits)
Version of the boot software (for control) (2 digits)
Version of the basic system software (2 digits)
Downloaded from ManualsNet.com search engine
0 2 0 1 0 3
9.12 Software Installation to the Own Module
Manufacturing information
of the Motion module
9 COMMON FUNCTIONS
9
359