01: When Connecting The Buffer Pass Unit With The Mainframe - Ricoh MP C6502SP Field Service Manual

Hide thumbs Also See for MP C6502SP:

Table of Contents

2. Installation

#01: When connecting the Buffer Pass Unit with the mainframe

• If the Buffer Pass Unit is to be connected to the Decurl Unit DU5020 (D727), go to "#02: When

connecting the Buffer Pass Unit with the Decurl Unit DU5020 (D727)".

This section describes the procedure for attaching the Wide Mylar to the entrance guide that was

removed in step 5.

[A]: Wide Mylar (50mm, accessory item #6)

[A]: Upper entrance guide

[B]: Lower entrance guide

Attaching the Wide Mylar to the Upper entrance guide

1. Peel off the sheet from the double stick tape [C] on the Wide Mylar.

Table of Contents