Adjustment For The Rubber Foot Positions On The Rail - Ricoh MP C6502SP Field Service Manual

Hide thumbs Also See for MP C6502SP:

Table of Contents

2. Installation

15. Plug in the machine and turn it on.

• To move down the paper tray, cover the photosensor with your left hand and press the bottom

plate operation button [A].

Adjustment for the Rubber Foot Positions on the Rail

The rail must be standing on the floor. If the screw holes on the LCT are too high or too low, and do not

overlap the vertical screw slots in the rail, the rubber feet of the rail must be adjusted. Change the rubber

foot positions on the rail before installing the rail.

1. The rubber feet are placed at [A] as shown below.

Table of Contents