Installation - Ricoh MP C6502SP Field Service Manual

Hide thumbs Also See for MP C6502SP:

Table of Contents

Installation

• The unit must be connected to a power source that is close to the unit and easily accessible.

• Make sure that the main machine is switched off and that its power cord is disconnected before

doing the following procedure.

• The buffer pass unit is unstable and can fall over easily. To avoid personal injury or damage to the

unit, use caution when you pull out the buffer pass unit drawer until the unit has been docked to the

main machine.

• The power cord that comes with the buffer pass unit is for use with this equipment only. Do not use it

with other appliances. Doing so could result in fire or electric shock.

• Rated Voltage of Output Connector [A] for Accessories: Max. DC 24 V.

Fuse Rating (DC5V, DC24V Fuse)

Buffer Pass Unit Type 5020 (D751) (D137/D138 Only)

Table of Contents