Ricoh MP C6502SP Field Service Manual page 333

Hide thumbs Also See for MP C6502SP:

Table of Contents

• The rail must be standing on the floor. If the screw holes on the LCT are too high or too low,

and do not overlap the vertical screw slots in the rail, the rubber feet of the rail must be

page 336 "Adjustment for the Rubber Foot Positions on the Rail")

6. Set the LCT [A] on the rail [B], and then slide it towards the main machine.

7. Install the LCT on the main machine.

LCIT RT4020 (D709)

Chapters

Table of Contents