28. Reattach the following covers.
• Left cover
• Rear cover
• Rear left cover
• Top left cover
• Top right cover
When attaching the rear cover, pass the heater harness through the hole where the heater harness
cover was.
29. Remove the rear lower cover of the main machine.
30. Fix the heater bracket [A]. ( x 2)
31. Attach the heater harness [A] and ground wire [B]. (
To attach the ground wire, remove the screw and replace it with the polished round screw M3.
x 1,
x 1)
LCIT RT4020 (D709)
349