Toshiba e-STUDIO556 Service Manual page 1175

Sub
05/08 Mode Element
element
08 Setting System Image
Mode
08 Setting System Electronic
Mode Filing
08 Setting System User interface
Mode
e-STUDIO556/656/756/856
Item Subitem
Binarizing level
setting (When judging
as black in the ACS
Mode)
Sub- Default
Code Details
code value
9230 4 Step +2 208
9233 Equipment name 0
setting to a folder
when saving files
9236 Default setting of print 1
menu
116
Acceptable
RAM Contents
value
0-255 SYS Sets the binarizing level of each step. When the value
increases, the image becomes darker. When the value
decreases, the image becomes lighter. Refer to 08-
9204.
0~2 SYS Sets whether or not adding the equipment name to the
folder when saving files. 0: Not add 1: Add the
equipment name 2: Add the user name
1~4 SYS 1: Private print screen (Job list of log-in user is
displayed if user authentication is enabled.)
2: Hold print screen (Job list of log-in user is displayed if
user authentication is enabled.)
3: Private print screen (If the private print screen is
displayed when user authentication is enabled, user list
is displayed if user logs in as GUEST, and job list of
log-in user is displayed if user logs in as general user.)
4: Hold print screen (If the private print screen is
displayed when user authentication is enabled, user list
is displayed if user logs in as GUEST, and job list of
log-in user is displayed if user logs in as general user.)
* If user data department management (08-9264) is
changed from OFF to ON, the value in this code
changes from "1" to "2", and "3" to "4". The value does
not change if it is "2" or"4". Reset this value as
necessary when changing user data department
management (08-9264) from OFF to ON.
Proce Servic
dure e UI
4
1
1