Toshiba e-STUDIO556 Service Manual page 1197

Sub
05/08 Mode Element
element
08 Setting System Maintenance
Mode (Remote)
08 Setting System Maintenance
Mode (Remote)
08 Setting System Network
Mode
08 Setting System General
Mode
08 Setting System Image
Mode processing
08 Setting System Laser
Mode
08 Setting System User interface Interruption of stapling
Mode
08 Setting System User interface Interruption of stapling
Mode
e-STUDIO556/656/756/856
Item Subitem
operation (no staple)
operation (no staple)
Sub- Default
Code Details
code value
9796 Total counter 0
transmission date
setting
9797 PM counter 0
notification setting
9798 Temporary 99999
communication
password setting
9799 Local authentication 0
mode switchover
9804 Forcible mode change 1
in toner empty status
9805 Polygonal motor 3
standby rotation Shift
waiting time at job
end
9810 0 Copying 1
9810 1 Printing / BOX printing 0
138
Acceptable
RAM Contents
value
0~31 SYS 0 to 31
0~1 SYS 0: Invalid 1: Valid
SYS Sets a temporary communication password. The
password can be entered in alphanumeric characters (A
to Z, a to z, 0 to 9) up to 10 digits. The entered
password is displayed with "*" on the touch panel and
the self-diagnostic lists. (Maximum 10 digits, minimum 5
digits)
0~1 SYS Sets the authentication mode when "0: (Internal
authentication)" is selected in the code 08-9293.
0: Card ID differs from the User ID 1: Card ID is the
same as the User ID
0~2 SYS 0: SLEEP MODE 1: AUTO POWER SAVE 2: READY
0~9 SYS 0: 0 sec. (current setting) (Polygonal motor ready
rotation at job end)
1 to 9: Setting value x 5 sec.
0~1 SYS When staple runs out while printing in the stapling
mode, sets whether printing is interrupted or printing is
continued by switching to sorting. This code is valid only
when printing in the stapling mode. However, printing is
always interrupted when staple for saddle stitch runs
out.
0: Continues printing by switching to sort setting
1: Interrupts printing
0~1 SYS When staple runs out while printing in the stapling
mode, sets whether printing is interrupted or printing is
continued by switching to sorting. This code is valid only
when printing in the stapling mode. However, printing is
always interrupted when staple for saddle stitch runs
out.
0: Continues printing by switching to sort setting
1: Interrupts printing
Proce Servic
dure e UI
1
1
11
1
1
1
4
4