Viewing The Last Diagnostic Results; Introduction - Avaya CallPilot 201i Maintenance And Diagnostics

9. Click Run.

Viewing the last diagnostic results

Introduction

You can review the results of previously run diagnostics by clicking the Get Last Results button
for a component.
To view the last diagnostics result
1.
2. In CallPilot Manager, click Maintenance → Maintenance Admin.
3. Click the plus sign (+) beside the CallPilot server to expand the component tree.
4. Continue clicking the plus sign (+) until the component with which you want to work is
5. Click the hardware component for which you want to run diagnostics.
6. Scroll down to the Diagnostics section.
Avaya CallPilot® 201i Server Maintenance and Diagnostics
Note:
If you want to run all of the diagnostics, check the Diagnostic Description check
box at the top of the list.
Result: A new Web browser window opens to display the progress and results of
the diagnostics.
Note:
The Diagnostic Results box in the Diagnostics section displays diagnostic results
when you click Get Last Result.
Important:
Avaya recommends that you courtesy stop rather than stop a component if
possible. For instructions, see
Run CallPilot Manager and log in.
Result: The Maintenance page appears.
visible.
Result: The Maintenance page refreshes to show details about the component.
Result: The following figure shows the Diagnostics section for an MPC-8 card
(removable MPC.
Viewing the last diagnostic results
Starting and stopping components on page 61.
December 2010 67