Using Tcp/Ip Diagnostic Tools; The Ipconfig Command; Ipconfig Default; Ipconfig Command Syntax - Avaya CallPilot 1002rp Maintenance And Diagnostics

6. Click Log → Exit.

Using TCP/IP diagnostic tools

This section describes the following TCP/IP diagnostic tools which are available for the network
adapter:
• ipconfig
• ping
• tracert
• arp
• nbtstat
• netstat
These utilities help you to verify network connectivity, test the network interface, and isolate
any configuration problems.

The ipconfig command

The ipconfig command displays IP configuration information.

ipconfig default

If you run the command without flags, it displays the IP address, subnet mask, and default
gateway for each adapter bound to TCP/IP.

ipconfig command syntax

The ipconfig command uses the following syntax:
ipconfig /[ ]
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
Result: The event log reappears.
Result: The Event Viewer closes.
Using TCP/IP diagnostic tools
December 2010 29