Using Tcp/Ip Diagnostic Tools; The Ipconfig Command; Ipconfig Default; Ipconfig Command Syntax - Avaya CallPilot 202i Manual

Using the operating system online diagnostic tools

Using TCP/IP diagnostic tools

This section describes the following TCP/IP diagnostic tools available for the network adapter.
These tools are useful to diagnose LAN communication problems. The first three tools are the
most useful:
• ipconfig
• ping (The ping command
• tracert
• arp (The arp command
• nbtstat
• netstat
These utilities help you to verify network connectivity. Network connectivity is essential to
CallPilot operation. These utilities help you to thoroughly test the network interface and isolate
configuration problems.

The ipconfig command

The ipconfig command displays IP configuration information.

Ipconfig default

If you run the command without flags, it displays the IP address, subnet mask, and default
gateway for each adapter bound to TCP/IP.

Ipconfig command syntax

ipconfig /[ ]
The following flags are available for the ipconfig command.
Flag
/?
36 Avaya CallPilot 202i Server Maintenance and Diagnostics
(The ipconfig command
on page 37)
(The tracert command
on page 40)
(The nbtstat command
(The netstat command
Displays Help information.
on page 36)
on page 38)
on page 41)
on page 42)
Description
December 2010