928
Englne, Crankshaft,
Pistons
13
Assembly
note
On crankcases that have an "X" embossed
next to the housing number and on crank-
cases with a closed main-bearing
bushing
(bearing l), the specfied
tightening
torque of
the studs has been modified.
As of Model Year '85, the matching number
was extended to four digits, and the "X
embossed ahead of the number was there-
fore deleted.
Tlghtenlng
sequence
- tlghtenlng
torque
lQ\
,
?
Number l...lO
in 3 steps:
M 12 x 1.5 thread
1st step 30 Nm (22 Alb.)
2nd step 55 Nm (41 ftlb.)
3rd step 75 + 5 Nm (55 + 4 ftlb.)
Number ii -22 in 2 steps:
M 10 thread
1st step 20 Nm (15 ftlb.)
2nd step 50 + 5 Nm (37 + 4 ftlb.)
Note
As of Model Year '92, hexagon head bolts are
used to assemble the two crankcase sections,
Assembling
upper and lower crankcase
sectlons
Printed
in Germany
- XXXI, 1993
13-10a