Porsche 928 Workshop Manual page 115

10
Engine, Crankcase
928
17.Pull air hose off alternator.
18.Disconnect cable from starter.
19.Detach clamps for starter cable
from steering transverse and pull
alternator cable thru toward front
of vehicle.
ZO.Remove cover from clutch housing.
.Unscrew bolts holding driving
plate, unscrew pan head screw of
bearing sleeve, push driven
plate back along central shaft.
22.The pins for the oil temperature
sensor must point downward before
engine can be removed.
Note:
The clutch must be removed completely
for vehicles from Model 87, engine
type M 28.41 onwards. Refer to the
Workshop Manual, Page 30 - 6b.
10 - 14
Engine, Removing and Installing
XXII,1969 - Printed in Germany