Porsche 928 Workshop Manual page 104

10
Engine, Crankcase
928
REMOVING AND INSTALLING ENGINE
Removing
1. Use fender and bumper protective covers.
2. Disconnect battery ground cable at spare
wheel well.
.
"2'"
-i
I
'.'?!I
3. Loosen and remove engine compartment
cross brace.
Note
Car must stand on its wheels when cross brace is
removed or installed.
5. Detach windshield washer hoses and engine
compartment light wires.
6. Disconnect engine hood supports at top,loosen
engine hood bolts and remove engine hood.
7. Remove cap from coolant expansion tank.
8. Remove air intake hoses and entire air cleaner
assembly.
9. Raise car. Place piece of wood (locally manu-
factured) on central tube and rear tunnel brace.
4. Set up hoist and align with specified pick-up
points on car. but do not raise car.
10 - 2 Removing and Installing Engine
Printed in Germany
l