Vascular Summary Report
Vascular Summary Report
Introduction
The vascular summary report is structured to automatically
display vascular measurements made at specific anatomical
sites. An average of the 3 measurements can also be
displayed. Calculated ratios are automatically summarized and
displayed.
Displaying the Summary Report
The summary report can be displayed at any time during the
exam by selecting VASC REPORT from the Vascular
Calculation Sub-Menu.
Data entered as new patient data is automatically summarized
at the top of the summary report. Measurements are
summarized below the patient data. Calculations and ratios
appear at the bottom of the summary report.
To exit the summary report display and resume scanning, select
VASC REPORT from the Sub-Menu to deactivate it.
11–6
LOGIQ
500 Basic Users Manual
2233658–100 Rev. 0