Probe Overview; Labeling - GE Logiq 500 User Manual

Probe Overview

Labeling

Probe orientation Each probe is provided with an orientation marking (refer to
Figure 15–1). This mark is used to identify the end of the probe
corresponding to the side of the image having the orientation
mark on the display.
Figure 15–1. Orientation Marking on Probe
Each probe is labeled with the following information:
S
S
S
S
S
S
15–2
Probe Overview
1
1 Orientation Marking
Seller's name and manufacturer
Operating frequency
GE part number
Probe serial number
Month and year of manufacture
Probe designation—provided on the probe grip and the top
of the connector housing, so it is easily read when mounted
on the system and is also automatically displayed on the
screen when the probe is selected.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0