Using Cine Loop - GE Logiq 500 User Manual

Using Cine Loop

Specify which sections of Cine memory to playback by creating
a Cine Loop.
To create a Cine Loop:
Archive
Frame
Figure 6–6. Cine Gauge Frame Start
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
1. Press Freeze. The key backlights.
2. Rotate the Cine Scroll dial to the desired starting
position in Cine memory. The Cine Sub-Menu is
displayed on the Soft Menu display.
DICOM Auto Seq
Start Review Loop
Loop Speed
End Multpl
Frame CINE
1/1
Figure 6–5. Cine Sub-Menu
3. Select START FRAME on the Cine Sub-Menu.
4. Rotate the Cine Scroll dial to the desired ending
position in Cine memory.
5. Select END FRAME on the Cine Sub-Menu.
Using Cine
CINE
Side
Change
Cine
Gauge
6–11