Save Values; Overview; Saving Scan Values - GE Logiq 500 User Manual

Save Values

Overview

Save Values is a selection in the Set Up Menu that allows for
the quick retention of a current system settings and preset
parameters.
It works like the Save command in the Custom Display, System
Parameter or Preset Program sub-menus.
Custom
Display
System
Paramtr

Saving Scan Values

If at any time during a scan it is felt that the system settings are
optimized and should be saved as an Exam Applications
Preset, simply select Save Values.
The system will start the process of saving all of the current
settings as a User Exam Applications Preset.
If a factory default applications preset is active when Save
Values is selected, the message:
appears at the bottom of the screen. Enter the preset position
number 1 through 8. The data is saved and available for recall
at the designated preset location.
14–90
B Preset Set Up
Preset Save
Program Values
Utility
Figure 14–25. Set Up Sub-Menu
"Input User Preset Number (1-8)"
Save Values
ECG
User
Define
Diag.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0