Introduction; Overview - GE Logiq 500 User Manual

Hide thumbs Also See for Logiq 500:

Table of Contents

Introduction

Measurements and calculations derived from ultrasound

images are intended to supplement other clinical procedures

available to the attending physician. The accuracy of

measurements is not only determined by system accuracy, but

also by the use of proper medical protocols by the user. When

appropriate, be sure to note any protocols associated with a

particular measurement or calculation. Formulas and

databases used within the system software that are associated

with specific investigators are so noted. Be sure to refer to the

original article describing the investigator's recommended

clinical procedures.

Measurements can be made in all modes and image formats,

including real-time, freeze, CINE or VCR playback. The

selected exam category defines the default calculations

displayed on the Softkey Sub-Menu.

Measurement values update on the display until the

measurement has been completed. 18 lines of measurements

can be displayed on the screen at one time.

The measurement cursor is not automatically fixed when the

Record key is pressed. Record all desired measurements

displayed on the screen before erasing them.

Introduction

500 Basic Users Manual

2233658–100 Rev. 0