Adding Color; Gray Scale Color; Color Flow Mode - GE Logiq 500 User Manual

Gray Scale Color

Each mode selection (except CFM) can display the shades of
gray as shades of a color. The system simply maps out the
gray levels as hues of a color scale.
The gray scale bar changes color and the image display
changes accordingly.
The color displayed is selected in the Set Up/Custom Display
menu. The preset "Color Map" is chosen separately for
B-Mode, M-Mode and Doppler displays. Details on the color
map selection are found in Customizing Your System .
Colorized gray scale is an on/off selection found in each mode
Top Menu.
In each mode (B, M, PD and CWD), the color selection is found
on the Sub-Menu page two.
The Color rocker switch toggles colorized gray scale on or off.

Color Flow Mode

Color Flow Mapping (CFM) may also be referred to as Color
Doppler or Color Doppler Imaging. It is used to display color
coded blood flow information super imposed on the B-Mode,
M-Mode or Doppler displays.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0

Adding Color

Adding Color
5–25