Adding Comments To An Image - GE Logiq 500 User Manual

Adding Comments to an Image

To annotate an image:
S
.
S
NOTE: Annotations wrap to the next line when they are within
one character of the right margin.
The word wrap starts one line below the start of that annotation.
Annotations appear on all prints, photos, and VCR recordings.
BEFORE
If the cursor appears at the right edge of the lowest line, or a
word cannot be completed in the lower right corner, word wrap
cannot be executed.
To annotate an image using the Library:
S
S
S
S
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
Type comments where the cursor is currently located (the
display's home position) or use the Trackball/Arrow keys
to place the annotation cursor in the desired location before
typing.
Press Return to move to the next line.
AFTER
WORD WRAP
Figure 6–14. Next Line Word Wrap
Press Comment and move the annotation cursor to the
desired start position using the Trackball/Arrow keys.
Use the Sub-Menu Select rocker switch, if necessary, to
display the desired script.
Press the top/bottom of the appropriate rocker switch to
write the library script starting at the position of the cursor.
The same word wrap principles apply for library scripts as
typed comments.
Annotating an Image
WORD
WRAP
6–21