Advanced Obstetrical Options; Options - GE Logiq 500 User Manual

Advanced Obstetrical Options

Options

The following advanced options are available for monitoring
fetal development. Refer to the Advanced Reference Manual
for further details.
Fetal Trend Management
Patient data, measurements and calculations must be saved on
the hard drive or MOD during the initial examination. During
follow-up examinations, the OB Graph function can display the
current data or combine the current data with past data to show
a fetal growth trend.
Multigestational OB
The LOGIQ
allows the user to measure and report multiple fetus
development. The system is capable of reporting a maximum
of 4 fetuses.
Data Management Center (DMC)
The LOGIQ
computer (PC). This interface is used to send OB, GYN and
Vascular measurement and calculation data from the
LOGIQ
Additionally, the LOGIQ
personal computer (PC) and transfer it to the patient entry
menu.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
Advanced Obstetrical Options
500 offers an optional calculation package that
500 is capable of interfacing with a personal
500 to the PC for display, processing and evaluation.
500 can accept patient id data from a
9–39