System Setup - User Id And Password) - GE Logiq 500 User Manual

Page 5 of 7 (System Setup – Recording) (cont'd)
B&W Printer Exposure Pulse Length [msec]
Set the exposure pulse length needed to trigger the B&W printer print function.
Length from 50 to 500 ms in 50 ms intervals.
B&W Printer Exposure Min Interval [sec]
Set the minimum interval in seconds between B&W printer exposure capabilities.
Interval from 1 to 10 in 0.5 sec intervals.
B&W Image Archive
Choose how a Black & White image will be archived
B&W or Color.
Color Image Archive
Choose how a Color image will be archived.
B&W or Color.
Page 6 of 7 (System Setup – User ID and Password)
Password Ask
Choose to use the password security option at power up by asking for the user ID and
password.
On or Off.
NOTE: Refer to 3–19 for usage of the password function.
User ID 1–8
As many as eight user ID codes can be entered into the system parameters. These can
be used for security purposes. When used with an accompanying password, user ID
establishes limited access to the system at power up.
Maximum of 8 alphanumeric characters for each user ID.
Password 1–8
As many as 8 passwords can be entered to correspond with the 8 user ID codes. These
must be used when password ask is on.
Maximum of 8 alphanumeric characters for each password.
Initially, User ID Codes are blank. A User ID must be entered before a password can be
recorded.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
System Parameters
14–61