M-Mode; Introduction; Reading The M-Mode Or Doppler Spectrum Only Display - GE Logiq 500 User Manual

M–Mode

Introduction

M-Mode is used to determine patterns of motion for objects
within the ultrasound beam. The most common use is for
viewing motion patterns of the heart.
Be sure to read and understand Acoustic Output considerations
for each mode (refer to Safety chapter) before adjusting the
Acoustic Output control or any control affecting acoustic output.

Reading the M-Mode or Doppler Spectrum Only Display

The following information is displayed on the M-Mode or
Doppler mode spectrum image:
Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç
q
Figure 5–27. M-Mode or Doppler Spectrum Only Display Format
5–64

M-Mode

MHz
Ç
Ç
Ç
Ç
Ç
Ç
Ç
Ç
Ç
Ç
Ç
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0