Vcr Controls - GE Logiq 500 User Manual

Operator Controls

VCR Controls

These controls are used in conjunction with the approved
optional video cassette recorder.
Press the External Video key to allow for the display of an
external video signal (i.e. from a VCR) on the system monitor.
Pressing Play automatically selects external video.
Press the key a second time to return to LOGIQ
display.
Press this key to enable or disable the on board microphone to
allow for audio to be added to the taping of system video.
" Pressing the Stop/Play key either places the VCR in the play
J
/
mode or stops the play or record mode.
F Pressing the Pause/Record key either places the VCR in the
.
record mode or causes the VCR to pause if it is already in the
/
record or play mode.
NOTE: See Keyboard on 3–36 for additional VCR controls.
3–44
t
500 video
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0