System Care And Maintenance; Overview; Inspecting The System - GE Logiq 500 User Manual

System Care and Maintenance

Overview

Refer to Section 7 of the LOGIQ
(P9030TA) for any additional maintenance guidance.
Contact the local Service Representative for parts or planned
maintenance inspections. It is recommended that planned
maintenance be performed on the system every six months.

Inspecting the System

Examine the following on a monthly basis:
S
S
S
S
S
To avoid electrical shock hazard, do not remove panels or
DANGER
covers from console. This servicing must be performed by
qualified service personnel. Failure to do so could cause
serious injury.
Electrical
If any defects are observed or malfunctions occur, do not
Hazard
operate the equipment but inform a qualified service person.
Contact a Service Representative for information.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
System Care and Maintenance
Connectors on cables for any mechanical defects.
Entire length of electrical and power cables for cuts or
abrasions.
Equipment for loose or missing hardware.
Control panel and keyboard for defects.
Casters for proper locking operation.
500 Service Manual
16–11