Ob Report Page Layout - GE Logiq 500 User Manual

OB Summary Reports

OB Report Page Layout

The basic OB Report format consists of 2 pages for each region
available (USA, Europe, Tokyo University and Osaka
University).
The first page consists of 4 basic areas. The first, or top
portion, is generally patient data that was entered on the patient
entry menu at the beginning of the exam. This area cannot be
edited.
The second is the measurements area. It varies by region
format. Generally this area contains measurement titles, the
last 3 measurements made, the measurement average (if
averaging is used), estimated gestational age and the ability to
choose if the measurement is used in the calculation of the
composite age. This area can be edited by deleting
measurements, selecting yes/no for composite age or
rearranging the vertical location of a measurement using the
Report Format Editor in the Set Up/Preset Program page 6.
The third area is calculations. It varies by region format. These
items are results of measurements or patient data entered on
the Patient Entry Menu. This area cannot be edited.
The fourth area is comments. The same amount of area is
available for user comments for each region. The user can edit
this area freely. Comments made on page 1 are not reflected
on page 2. Therefore, comments on each page can be edited
individually.
9–24 LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0