Changing A Parameter Value - GE Logiq 500 User Manual

Hide thumbs Also See for Logiq 500:

Table of Contents

Custom Display

Changing a Parameter Value

To change a parameter value:

Trackball the arrow cursor to the desired parameter.

Press Set to highlight the choice.

When the desired value is selected or changed, Trackball the

arrow cursor to SAVE.

A prompt at the bottom of the screen asks:

"Overwrite Existing Data? 'y' or 'n'".

Press 'y' to save the new values for the preset displayed.

Press 'n' and the prompt "Input User Preset Number (1–8)"

appears. Enter the desired number.

NOTE: If no is selected to overwrite current data, the system is

asking to make a new user application preset. The eight

available spaces are displayed by selecting the preset top

If the parameter lists several values, Trackball the

arrow cursor to the desired value and press Set.

If the parameter needs the value to change, use the

Ellipse rocker switch to increase or decrease the value.

500 Basic Users Manual

2233658–100 Rev. 0