Activating Doppler Mode - GE Logiq 500 User Manual

Activating Doppler Mode

Activating PW Doppler Mode
To activate PW Doppler Mode, press the PD key. The key
backlights while in PW Doppler Mode. The Doppler sample line
and cursor are displayed.
.
Press PD a second time and the Doppler spectrum displays
along with the B-Mode image.
NOTE: Doppler display formats available depend on the
presettable parameters found in the Set Up/Custom Display
menus.
Position and size the sample volume to get a spectrum display.
Use the system's audio to listen for when the sample volume is
positioned over an area of flow.
.
To exit PW Doppler Mode, press B-Mode.
NOTE: The Set Up/Preset Program allows the types of
B/Doppler display formats to be chosen. Each time the PD (or
CWD) key is pressed, it cycles to the next display format
enabled in the Set Up/Preset Program.
Activating CW Doppler Mode
To activate CW Doppler Mode, press the CWD key, as
necessary. The key backlights while in CW Doppler Mode.
The Doppler spectrum displays along with the B-Mode image
(Steerable CW Doppler, NOT Non-Imaging CW Doppler).
To exit CW Doppler Mode, press B-Mode.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
Doppler
5–49