Imaging Parameter 5 - Probe Dependent 5) - GE Logiq 500 User Manual

Custom Display
Page 5 of 18 (Imaging Parameter 5 – Probe Dependent 5)
CWD Gain EC, UP, P, R
Choose the default gain value for continuous wave Doppler Mode.
Value from 0 to 32 in 2 digit increments.
CWD Dynamic Range EC, UP, P, R
Choose the continuous wave Doppler Mode dynamic range default value.
Value from 18 to 48 in 6 digit increments.
CWD Gray Scale Map EC, UP, P, R
Choose the continuous wave Doppler Mode gray scale default map.
1, 2, 3, 4, 5, 6, 7, 8, 9 or 10.
CWD Rejection EC, UP, P, R
Choose the continuous wave Doppler Mode rejection default level.
Level from 0 to 40 in 2 digit increments.
CWD Velocity [cm/s] EC, UP, P, R
Choose the continuous wave Doppler Mode velocity scale default value.
Value from 10 to 1000 in 10 digit increments.
CWD Wall Filter [cm/s]
Choose the continuous wave Doppler Mode wall filter default value.
0.3, 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 5.0, 7.0, 10, 15, 20, 30 or 50.
14–22
EC, UP, P, R
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0