Imaging Parameter 16) - GE Logiq 500 User Manual

Custom Display
Page 16 of 18 (Imaging Parameter 16)
CFM/PDI Initial Mode EC, R
Choose the default mode for color CFM or PDI.
CFM Regular CFM mode.
PDI Power Dopper Imaging mode.
PDI B/W Display EC
Set the default parameter for the PDI transparent mode Maps 1 and 2.
On or Off.
PDI Default Map EC
Choose the default color map for the PDI mode.
P1, P2, P3, P4, P5, P6, P7 or P8
PDI Dynamic Range EC, UP
Choose the default value for the Power Doppler dynamic range display.
Value from 10 to 100 in 10 digit increments.
PDI Tag Auto Start EC, R
Choose the initial default setting for PDI tag.
On or Off.
PDI Tag Center [cm/s] EC, R
Choose the default center point in cm/sec for the PDI color tag window.
Value from 0 to 500.
PDI Tag Width [cm/s] EC, R
Choose the default width in cm/sec for the PDI color tag window.
Width from 0 to 1000.
PDI Capture Interval [s]
Choose the default value (time) for the PDI capture interval.
Off No time interval update.
.5 Update at .5 second intervals.
1 Update at 1 second intervals.
2 Update at 2 second intervals.
ECG Update synchronized with ECG signal.
14–42
EC, R
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0