Zooming An M-Mode Image - GE Logiq 500 User Manual

Zooming an Image

Zooming an M-Mode Image

If the Zoom key is pressed while in B/M-Mode, only the
M-Mode image will be zoomed.
Press Zoom to display a magnified M-Mode image and a
Zoom
M-Mode zoom marker in the B-Mode image.
Adjust the Zoom Size control to the desired magnification
factor. The six steps are the same as B-Mode.
Use the up/down movement of the Trackball to move the Zoom
Markers vertically along the M-Mode cursor.
Use the side to side movement of the Trackball to move the
M cursor and Zoom cursor throughout the image.
Press Clear or Zoom to cancel the zoom function.
.
Clear
NOTE: Display Zoom does not function on a frozen B- and
M-Mode Timeline Image.
6–4 LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0