Imaging Parameter 12) - GE Logiq 500 User Manual

Custom Display
Page 12 of 18 (Imaging Parameter 12)
Timeline Sweep Method
Choose as a default between two types of timeline presentations.
Scroll
Moving-Bar
Timeline Format EC
Choose as a default how the timeline (M-Mode or Doppler spectrum) will be displayed.
Only one type of display format is available at one time.
Side/Side
Top/Bottom
Auto B Melt at Unfreeze
When the B Pause function is used to freeze B-Mode while in B/M or B/D, the preset
sets the default to have the B-Mode image remain paused when the system is unfrozen.
Off B-Mode remains paused at unfreeze.
On B-Mode exits pause condition at unfreeze.
M Mode Simul PD Activity
Choose as a default to have the ability to display simultaneous M-Mode and pulsed
Doppler spectrum.
Off No simultaneous M and PD display.
On Simultaneous display capable.
M Color Auto Start EC, R
Choose the initial default setting for M color (colorized gray scale).
On or Off.
M Color Map EC, UP
Choose a M color default map.
1, 2, 3, 4, 5 or 6.
M Tag Auto Start EC, R
Choose the initial default setting for M color tag.
On or Off.
M Tag Center [%] EC, R
Choose the center point of the M color tag window as a default.
Percentage from 0 to 100%. A percentage of the entire displayed M color window
(colorized gray scale).
14–34
EC
Continuous update at edge of the screen.
Timeline is updated by a bar moving across the screen.
B-Mode on left half of the display and the timeline on the right half.
B-Mode on the top of the display and the timeline across the bottom.
EC, UP
EC
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0