Parameter Menu Command Lines - GE Logiq 500 User Manual

Custom Display

Parameter Menu Command Lines

An example of a Custom Display parameter menu is shown in
Figure 14–4.
The top protected lines show the date, time, hospital name and
active probe. The next four lines provide information about the
menu displayed plus commands to manipulate the menu pages
and parameters.
Command line 1
This line shows the parameter categories available with the
current one highlighted. The categories listed are:
S
S
S
S
14–8
Figure 14–4. Custom Display Menu
User Param is not active at this time.
System Param has 7 pages of programmed parameters.
Preset Program has 10 pages of programmable
parameters.
Custom Display has 18 pages of programmable
parameters.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0