ECG Option
Physio Sweep Speed
The sweep speed of the physio signal on the B-Mode image
can be set independent of the timeline (M-Mode and Doppler)
sweep speed.
This is accomplished using the preset parameter "Physio
Sweep Speed on B". It is found on Set Up/Custom Display
page 3.
ECG Sub-Menu
The 3 pages of the ECG Sub-Menus provide for control of the
physiological input signals. In each case, select the proper
sub-menu page by pressing the Sub-Menu Select rocker
switch.
10–32
LOGIQ
500 Basic Users Manual
2233658–100 Rev. 0