Cable Handling
Take the following precautions with probe cables:
S
S
S
Activating the Probe
To activate the probe, press the Probe Select key that
corresponds to the probe port to which the desired probe is
connected. The Single CWD key is used to activate the
dedicated continuous wave Doppler (CWD) probe.
Key Light Indicators:
S
S
S
The probe activates in the currently selected operating mode.
The probe's default settings for the mode and selected
application are used automatically.
CWD Mode, split Crystal or Doppler-Only CW probes are
options available on the LOGIQ
LOGIQ
500 Basic Users Manual
2233658–100 Rev. 0
Keep free from wheels
Do not bend the cable acutely
Avoid crossing cables between probes.
Figure 3–20. Probe Select Keys
Dark—no probe attached to probe port.
Half Bright—probe attached to probe port but not active.
Brightly Lit—probe attached to probe port and is active.
Probes
500.
3–31