Imaging Parameter 9 - Probe Dependent 9) - GE Logiq 500 User Manual

Page 9 of 18 (Imaging Parameter 9 – Probe Dependent 9)
3D Aspect Ratio EC, UP, P, R
Choose the ratio between depth and width in 3D-Mode. Depth is the first number.
Width is the second number.
2/1, 1/1, 1/2, 1/3, 1/4 or 1/5.
3D Swing Angle [deg] EC, UP, P
Choose the swinging angle of the MIP image display.
Angle from 5 to 60 degrees in 5 degree increments.
3D Swing Center [%] EC, UP, P
Choose the center position to swing the MIP image display.
Percentage from 0 to 100% in 10% increments.
3D View Direction EC, UP, P, R
Choose the viewpoint for the construction of the MIP images when in 3D-Mode.
Normal or Reverse.
End Frame
The marker that indicates the viewpoint for the MIP image is
CAUTION
displayed on the left side of the monitor.
Normal is indicated by the marker "
Reverse is indicated by the marker "
Ensure that this marker is consulted for MIP image viewpoint.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
Start Frame
Figure 14–7. MIP Image Principles
Custom Display
Reverse
Top View
Start Frame
X
Swing Center
End Frame
Normal
".
".
14–29