Doppler Mode - GE Logiq 500 User Manual

Uterine Length, Height, and Width
The GYN Calculation Sub-Menu page 2 allows for
measurements to be recorded as uterine length (Ut-L), height
(Ut-H) or width (Ut-W).
Length is typically measured in the sagittal plane while height
and width are measured in the axial plane.
Scan the patient in the appropriate scan plane.
Endo
Figure 9–15. GYN Calculation Sub-Menu
Select the desired measurement from the GYN Calculation
Sub-Menu (Ut-L, Ut-H or Ut-W).
Measurements are recorded on the GYN Summary Report.
The last 3 measurements of each type can be averaged by the
Summary Report Page.
Endometrium Thickness
An endometrium thickness measurement is also available on
the GYN Calculation Sub-Menu.
Scan the patient.
Select ENDO from the GYN Calculation Sub-Menu. Perform a
standard distance measurement as described in 7–7 .

Doppler Mode

Three GYN related measurements can be taken in Doppler
Mode and recorded on the GYN Summary Report. These are
resistive index measurements for a left ovarian vessel, uterine
vessel and right ovarian vessel.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
Ut–L Ut–H Ut–W
GYN Measurements
GYN
Report
9–41