Imaging Parameter 17) - GE Logiq 500 User Manual

Hide thumbs Also See for Logiq 500:

Table of Contents

Page 17 of 18 (Imaging Parameter 17)

ECG Auto Display

Choose the initial default setting for the ECG waveform to be displayed on the monitor.

Choose the default value for ECG gain.

Value from –20 to +10 in 2 digit increments.

ECG Position

Choose the default value for the ECG display position (horizontal).

Value from –50 to +50 in 5 digit increments.

ECG Heart Rate Display

Choose the initial default setting for the heart rate, calculated from the ECG input, to be

displayed on the monitor.

ECG R Delay 1 [ms]

Choose the default value in milliseconds for the R wave Delay 1.

Value from 0 to 2000 in 5 digit increments.

ECG R Delay 1 to 2 [ms]

Choose the default value in milliseconds for the R wave delay between Delay 1 and

Value from 0 to 2000 in 5 digit increments.

ECG Audio Beat Sound

Choose the default setting to represent the ECG input as an audio tone.

ECG Audio Beat Sound Tone

Choose as a default the type of tone to be used to represent the ECG input.

Tone-1, tone-2 or tone-3.

500 Basic Users Manual

2233658–100 Rev. 0

Custom Display