Surface Mode (Option); Overview - GE Logiq 500 User Manual

Hide thumbs Also See for Logiq 500:

Table of Contents

This option creates a projected image different from 3DvieW. It

uses images stored in Cine. The calculation used for the

projection is based on the transmission principle of light using

Volume-Rendering. This is most often used to create a surface

imaging of a fetal face.

This function is available only in single B-Mode.

Refer to 3DvieW Mode section as needed.

This 3D-Surface option is designed for qualitative information

only and has no provision for any measurement or computation

No specific reconstruction resolution or accuracy is provided or

claimed for this option.

Since positional information of the original scan is not available,

all measurement functions cannot be performed on a

3D-Surface image.

NOTE: Consider all of the above cautions when using

3D-Surface images to evaluate a patient. 3D-Surface images

should not be used for quantitative information but a qualitative

supplement to all other diagnostic data collected for that patient.

Refer to the Advanced Reference Manual for further details.

500 Basic Users Manual

2233658–100 Rev. 0

3D–Surface Mode

3D-Surface Mode