Cine Loop Speed; Multipl Cine - GE Logiq 500 User Manual

Cine Loop Speed

To adjust the speed of viewing Cine Loop playback, access
LOOP SPEED from the Cine Sub-Menu.
Archive
Frame
.
Figure 6–9. Cine Sub-Menu (Loop Speed)
NOTE: Cine cannot be viewed faster than real-time.
To increase playback speed, press the top of the LOOP SPEED
rocker switch.
Press the bottom of the LOOP SPEED rocker switch to slow
down playback speed.
Each press of the rocker switch cycles to the next speed setting
(1/1, 1/2, 1/4 or 1/8).

Multipl CINE

The Multipl CINE Soft-Menu selection is used in Dual B-Mode
Cine Operation.
With Multipl CINE on (menu highlighted), Cine review of the two
B-Mode images can be done simultaneously.
With Multipl CINE off, Cine review is done separately using the
L/R keys to designate the active Cine image.
Review with Multipl CINE on/off can be accomplished with the
Cine knob or review loop.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
DICOM
Auto Seq
Start Review Loop
Loop Speed
End Multpl
Frame CINE
1/1
Using Cine
CINE
Side
Change
Cine
Gauge
6–13