Application) - GE Logiq 500 User Manual

Preset Program
Page 1 of 10 (Application)
Body Pattern Probe Mark Preset
Choose to activate the preset position of the probe marker graphic.
On or Off.
Body Pattern Package EC, UP
Choose one of the 8 customized body pattern packages to be displayed with the current
application preset.
Body pattern package 1, 2, 3, 4, 5, 6, 7 or 8.
Refer to 14–55 for details on programming the contents of each body pattern package.
Comment Erase at Display Change
Choose to erase all comments when a change is made in scan mode.
On or Off.
Comment Home Position Horizontal
Choose a point on the horizontal axis for the comment cursor home position.
Enter 1 to 56 in 1 digit increments.
Comment Home Position Vertical
Choose a point on the vertical axis for the comment cursor home position.
Enter 1 to 26 in 1 digit increments.
Comment Clear Key Function
Choose to erase all comments with the Clear key or just the line of comments that the
cursor is on.
All Erase all comments on the screen.
Line Erase the comments on the cursor line. The second time Clear is pressed, all
comments will be erased.
Trackball Function at Freeze
Choose the function assigned to the Trackball when the image is frozen.
No
Measure
Comment
Body
14–66
EC, UP
EC
EC, R
EC, R
EC
EC
No function assigned.
Trackball assigned to the measurement function.
Trackball assigned to the comment function.
Trackball assigned to the body pattern function.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0