Operation Error Message Description - GE Logiq 500 User Manual

Troubleshooting

Operation Error Message Description

Category
General Register is filled.
Register is empty.
Save data? 'y' or 'n'.
Overwrite existing data?
'y' or 'n'.
Please Select 'y' or 'n'.
Improper Data Selected.
Recording Check Printer. Paper is
Devices jammed.
C l Color Video Printer Vid P i
Check Printer. Ribbon
Cassette error.
Check Printer. Paper
Cassette error.
Check Printer, Paper
Supply empty.
Shut the top hatch of
printer.
Shut the bottom hatch of
printer.
Check Printer, Paper is
incorrect.
Check Printer.
Table 16–4. Operation Error Message Description
*
16–28
Problem/ Possible
Message Cause
Cannot register any
more because
registration function has
reached its limit.
Cannot delete any more
because registration
function is empty.
System requires
operator reaction to save
some data.
There is pre-existing
customized data when
saving.
A key other than those
specified was pressed.
The data input is not
correct.
Paper in the printer is
jammed.
Something is wrong with
the ribbon cassette or its
setting.
The paper cassette
setting is wrong.
The printer is out of
paper.
The top hatch of the
printer is open.
The bottom hatch of the
printer is open.
The placing of paper is
incorrect.
There is no response
from the printer.
If System Error Message occurs, record the message and
contact a Service Representative. Be aware that the system
may be operating at reduced capabilities, some functions
inoperative or not operating at all.
Possible
Corrective Action
*
*
Y to save data,
N to not save data.
Y to save changes,
N to ignore changes.
Enter Y or N.
Enter correct data.
Locate and clear the
paper jam.
Remove ribbon and
re-install.
Remove cassette, set
and re-install.
Add paper.
Open/shut top hatch.
Open/shut bottom hatch.
Remove casette, adjust
and reinstall.
Turn power off and on
again.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0