Report Pages - GE Logiq 500 User Manual

Report Pages

<AVG> or <LAST> indicates that the Average or Latest value
will be displayed in this column. This depends on the preset,
Average Activity , in the Set Up/Preset Program menu page 3.
The 3 report page measurements can be averaged and the
average used in other calculations.
After displaying an LV Summary Report, the calculation method
can be changed by moving the highlighted cursor to "Change
Method" and pressing Set.
The current report will be cleared and a method selection menu
appears. Use the Trackball to select a new LV method and
press Set.
After pressing Set the new LV method report is displayed.
Figure 10–2. Report Page Change Method
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
Introduction
10–5