Trace Auto - GE Logiq 500 User Manual

Additional Cardiac Calculations

Trace Auto

To turn Doppler Auto Trace on or off:
Figure 10–32. Cardiac Calculation Sub-Menu
Select TRACE AUTO from the Calculation Sub-Menu.
Use the Trace Auto Sub-Menu selection to turn on/off the
Doppler Auto Trace function.
If Trace Auto is highlighted, the Doppler envelope will
automatically be traced as determined by parameters set in
Custom Display page 13 and Preset Program page 7.
If Trace Auto is not highlighted, the Auto Trace function is off
and traces can be performed manually.
Trace Method
The system will trace the peak value, floor and peak, mean and
peak or mode and peak, depending on the method selected by
the user.
10–28
PHT ET Max PG
MVA Mean PG
TRACE
AUTO
LV
Report
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0