B–Mode
Introduction
The LOGIQ
format shows the operator valuable information relating to
patient data and system scan parameters.
B-Mode, also referred to as 2-D Mode, displays a two
dimensional gray scale image of the structures within the
probe's field of view. The anatomy imaged can be evaluated,
measurements and calculations performed as well as making
an initial survey prior to entering other modes.
B-Mode Key Operation
Pressing the B-Mode key while in a combination of other modes
will result in the following:
B/PD
B/M
B/CFM and PD
B/CFM and M/CFM
B/CFM
M/CFM
5–2
500 offers a wide variety of display formats. Each
Current Mode
B
B
B/CFM
B/CFM
B
B/CFM
Table 5–1. B-Mode Key Operation
LOGIQ
B-Mode
Resultant Mode
500 Basic Users Manual
2233658–100 Rev. 0