Accessing Diagnostics - GE Logiq 500 User Manual

Accessing Diagnostics

To access the available diagnostics, select the Set Up Top Menu.
Custom
Display
System
Paramtr
Select DIAG from the Set Up Sub-Menu. The diagnostic test
menu appears on the screen.
Figure 16–10. Diagnostic Test-Menu
Type in the desired test number and press Return. The test
begins running or the test pattern is displayed.
EXE TIME is the test execution time. (The time needed to run
the test.)
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
B Preset Set Up
Preset Save
Program Values
Utility
Figure 16–9. Set Up Sub-Menu
Operator Diagnostics
ECG
User
Define
Diag.
16–35