Freezing An Image (Freeze Key); Freezing An Image (Foot Switch Option) - GE Logiq 500 User Manual

Freezing an Image (Freeze Key)

.
To freeze an image:
S
NOTE: If both B- and M-Modes are active, the B-Mode and
timeline trace stops immediately. Use the Cine Scroll Control to
start CINE review.
To reactivate the image:
.
S
NOTE: Deactivating Freeze erases all measurements and
calculations from the display (but not from the report page).
Selecting a new probe unfreezes the image.

Freezing an Image (Foot Switch option)

Toggle Freeze on and off by pressing the foot switch. Pressing
Foot Switch
the left foot switch backlights the Freeze key on the console.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
Press Freeze. The key backlights.
Press Freeze again. Deactivating Freeze restarts the
B-Mode and timeline after a black and white bar indicating
discontinuity is inserted in the timeline (M-Mode Display).
Freezing an Image
6–7